Plater Racker

Requirements

• High school diploma, GED or equivalent.

• 3 shift rotation (midnights, afternoons, days).

• Know, understand, and meet specified production and quality standards through visual inspection and gauging processes.

• Production experience preferred.

• Advanced ability to effectively problem-solve.

• Communicate in English (orally and in writing).

• Team player within multi-disciplined team.

• Strong organizational skill set.

• Experience in cross functional team.

• Knowledge of supplies and equipment.

• Excellent analytical and problem solving skills.

• First Aid skills and/or certificates are considered assets. Job Duties

• Between racking sessions, must ensure all required empty dunnage is provided to final audit, and all full dunnage is removed in a timely manner.

• Between racking sessions, repack parts as necessary following repack priority schedule.

• Must be able to load and unload pistons from plating racks to required quality and production standards.

• When unloading the rack, start from bottom row up loading only one piston in each hand at a time.

• When loading racks ensure to load only one piston in each hand to prevent handling marks.

• Must be certified as a relief operator for Grinder Operator and Press Operator and follow safe operating procedures (specific to Maple Manufacturing).

• Assist pollution as required (Plater crashes).

• Rotate inventory to ensure First in First out (FIFO) prior to changeover.

• Assist with rack maintenance and repair or change damaged clips as required.

• Understand and adhere to the control and containment procedure for non-conforming or suspect non-conforming product.

• Understand and adhere to the scrap protocol procedure.

• Perform all related housekeeping procedures.

• Ensure Forklift pre-operational checklists done daily.

• Understand and adhere to Escalation Process.

• Follow rack and hanger condition/preventative maintenance process.

• Offload during break coverage is to be performed by utilizing one piston in each hand. There is to be no banging, knocking, or hitting of pistons while offloading.

• Compliance to all safety rules as well as company policies.

• Other duties as assigned by management.

• Start-Up Duties_

• When requested, assist Line Lead in required duties:

• Waste treatment probe calibration.

• Nickel filter charge.

• Other duties as required by management.

• Hanger Preventative Maintenance:

• Wipe excessive grease form all hangers.

• Check all hangers on the hanger gauge; select the best conditions hangers for use on the line. The remaining hangers are to be sent to maintenance for service.

• Clean hangers to rack contacts on the hangers that are selected to be used in the plater at the four contact areas with emery cloth.

• Consult Line Lead if necessary.

• Rack Preventative Maintenance:

• Clean any grease from the racks, at hanger contact and from coating, to be run per production schedule.

• Clean matching hanger to rack contact point with emery cloth.

• Remove excess “treeing” from contacts, flags, or shields being careful not to further damage rack coating.

• Straighten and adjust any part pins requiring adjustment for proper part contact.

• Consult Line Lead if necessary.

• Set up racking/unracking area as necessary for next production run as per production schedule.

• Clean rust preventative spray unit, take special care when cleaning optic sensors.

• Sweep and mop floors in plating and final audit area.

• Empty garbage.

• Set up final audit area with required packaging as per production schedule.

• Flush eyewash stations and emergency showers until water runs clear at platers and parts washers.

• Clean fire extinguisher covers.

Job Types : Full-time, Permanent

Salary : $18.26-$20.25 per hour

Benefits :

• Company events

• Dental care

• Disability insurance

• Employee assistance program

• Extended health care

• Life insurance

• On-site parking

• RRSP match

• Vision care Schedule:

• 8 hour shift

• Day shift

• Monday to Friday

• Night shift

Education :

• Secondary School (required) Licence/Certification:

• Grade 12 Math (preferred)